Low cost but wide range table size board maker. Processes substrate boards up to approximately A4 size (297mm x 210mm). Capable of making high frequency circuit boards with an optional air-floatation head.

The Eleven THP With air-floatation and non-contact pressure foot.

Working area : 310mm x 220mm

CHECK OUT
A VIDEO DEMONSTRATION
OF THE ELEVEN-T HERE...

 

Eleven T Specs :

Minimum pattern width (mm)		0.1 (4 mil)
Minimum milling width (mm)		0.1 (4 mil)
Working area (mm)		310 x 220 x 8 (12" x 9" x 0.31")
Table size (mm)		340 x 355 (13" x 14")
Control axis		X, Y
Control motor		Stepper Motor
Resolution (µm) *4		6.35 (0.25 mil)
Maximum travel speed (mm/sec.) *1		45 (1.8")
Spindle speed (min-1) Spindle motor		5,000 - 41,000 (model 40) 5,000 - 60,000 (model 60) DC Spindle
Drilling (mm)		0.2 - 3.175 (8 - 125 mil)
Maximum drilling cycle (cycles/min.) *2		60 (80 *3)
Maximum drilling stroke (mm)		8 (0.31")
Tool change		Lever action clamp
Milling method	Absolute	No
	Incremental	Yes
Compressed air (Mpa)		0.5 (required for HP type)
Power consumption		100 / 240 V, 50-60 Hz, 150VA
Dimensions W x D x H (mm)		495 x 400 x 370 (20" x 16" x 15")
Machine weight (kg)		Approx. 23 (51 lbs)
Interface		One USB or RS-232C port (Additional USB required with optional fiducial camera)
Standard equipement		Software Conversion & CAM
Options and accessories		Fiducial positioning camera 30x Dust proof, Acoustic cabinet Contacting pressure foot Connecting Cable (USB) Software EASY CAD, Correct DXF Vacuum cleaner
Starter kit (Optiion)		Connecting Cable (RS232C) Magnifying glass 10x Extention hose for Vacuum cleaner Tools: End mills Drill bit Router bit

*1 Optimum speed for cutting depends on tool, material of board and so on.
*2 This is a repeat count of drill's up and down on the maximum stroke.
Optimum strokes depends on the diameter of tool.
*3 In case of 80 strokes, maximum drilling stroke shortens. (to be adjusted at the factory)
*4 The smallest traveling figures for ordering each 3 axis movement.
They do not represent the accuracy of axis positioning.