The FP-21T Precision
50µm (2mil) line and space, the state of the art! Low vibration, high rigidity and with specially selected spindle motor. Stepping method (three dimensional regulation) and non-contacting pressure foot (HP type) lead to the fine processing technology.
Working area : 150mm x 150mm
FP-21T Precision Specs :
| Minimum pattern width (mm) | 0.05 (2 mil) | |||||||||
| Minimum milling width (mm) | 0.05 (2 mil) | |||||||||
| Working area (mm) | 150 x 150 x 30 (6" x 6" x 1.18") | |||||||||
| Table size (mm) | 240 x 380 (9" x 15") | |||||||||
| Control axis | X, Y, Z | |||||||||
| Control motor | 5 phase Stepper Motor | |||||||||
| Resolution (µm) *4 | 1 (0.04 mil) | |||||||||
| Maximum travel speed (mm/sec.) *1 | 60 (2.4") | |||||||||
| Spindle speed (min-1) Spindle motor |
5,000 - 40,000 Dynamic runout: less than 10µm DC Spindle |
|||||||||
| Drilling (mm) | 0.05 - 3.175 (2 - 125 mil) | |||||||||
| Maximum drilling cycle (cycles/min.) *2 | 80 | |||||||||
| Maximum driling stroke (mm) | 30 (1.18") | |||||||||
| Tool change | Collet chuck | |||||||||
| Milling method | Absolute | manual switching | ||||||||
| Incremental | Yes | |||||||||
| Compressed air (Mpa) | 0.5 | |||||||||
| Power consumption | 100 / 240 V, 50-60 Hz, 250 VA | |||||||||
| Machine dimensions W x D x H (mm) |
Machine: 415 x 500 x 375 (16" x 20" x 15") Controller: 125 x 235 x 305 (5" x 9" x 12") |
|||||||||
| Machine weight (kg) | Machine: 36 (80 lbs) Controller: 4 (9 lbs) |
|||||||||
| Interface | One USB or RS-232C port (Additional USB required with optional fiducial camera) |
|||||||||
| Standard equipement | Stepping milling Software Conversion & CAM |
|||||||||
| Options and accessories | Dust proof, Acoustic cabinet Vacuum table (VTP-CRM) Fiducial positioning camera 30x / 60x Tool protrusion equipment Ring-setter/ Precision ring-setter (manual) Drilling ring Connecting Cable (USB) Microscope 100x Software EASY CAD, Correct DXF Vacuum cleaner Air compressor |
|||||||||
| Starter kit (Option) |
Connecting Cable (RS232C) Magnifying glass 10x Extention hose for Vacuum cleaner Substrate surface detecting function Anti-vibration mat
|
|||||||||
*1 Optimum speed for cutting depends on tool, material of board and so on.
*2 This is a repeat count of drill's up and down on the maximum stroke.
Optimum strokes depends on the diameter of tool.
*3 In case of 80 strokes, maximum drilling stroke shortens. (to be adjusted at the factory)
*4 The smallest traveling figures for ordering each 3 axis movement.
They do not represent the accuracy of axis positioning.
