X, Y, Z triple-axes control. 10 automatic tool change. Wide working area. Equipped with high-grade, high-torque spindle with auto-tool-change. Air-floatation type (HP type) is also available.

Working area : 325mm x 325mm

√ High-durable spindle motor for heavy processing
√ High-rigidity construction
√ Suitable for working on various materials in addition to typical substrates

FPZ-31AT SPECS :

Minimum pattern width (mm)		0.1 (4 mil)
Minimum milling width (mm)		0.1 (4 mil)
Working area (mm)		325 x 325 x 40 (13" x 13" x 1.57"), 295 x 325 x 40 (12" x 13" x 1.57") (model 40)
Table size (mm)		445 x 585 (18" x 23")
Control axis		X, Y, Z
Control motor		Stepper motor
Resolution (µm) *4		6.35 (0.25 mil)
Maximum Travel speed (mm/sec.) *1		45 (1.8")
Spindle speed (min-1) Spindle motor		5,000 - 40,000 (model 40/U) 5,000 - 60,000 (model 60) 5,000 - 100,000 (model 100) DC Spindle (model 40/U ), HF Spindle (model 60/100)
Drilling		0.2 - 3.175 mm (8 - 125 mil)
Maximum drilling cycle *2 (cycles/min)		60 (80 *3)
Maximum drilling stroke (mm)		40 (1.57")
Tool change		10 / Automatic, 9 / Automatic(model 40)
Milling Method	Absolute	No
	Incremental	Yes
Compressed air (Mpa)		0.6 (required for model 60/100)
Power consumption		100 / 240V, 50-60Hz, 270VA
Machine Dimensions W x D x H (mm)		575 x 700 x 450 (23" x 28" x 18")
Weight (kg)		Approx. 60 (133 lbs)
Interface		One USB or RS-232C port (Additional USB required with optional fiducial camera)
Standard equipment		Software: Conversion + CAM
Options and accessories		Fiducial positioning camera 30x Vacuum table (VT-ABS) Dust proof, Acoustic cabinet Tool protrusion equipment Ring-setter/ Precision ring-setter (manual) Drilling ring Connecting Cable (USB) Software EASY CAD, Correct DXF Vacuum cleaner
Starter kit (Option)		Connecting Cable (RS232C) Magnifying glass 10x Extention hose for Vacuum cleaner Tools: End mills Drill bit Router bit

*1 Optimum speed for cutting depends on tool, material of board and so on.
*2 This is a repeat count of drill's up and down on the maximum stroke.
Optimum strokes depends on the diameter of tool.
*3 In case of 80 strokes, maximum drilling stroke shortens. (to be adjusted at the factory)
*4 The smallest traveling figures for ordering each 3 axis movement.
They do not represent the accuracy of axis positioning.