The FP-21T

fp21t-small

Desktop type with full 3-axis, 5 phase stepper motor control system. Equipped with high speed & high power spindle motor. Air-floatation non-contact pressure foot option is available for the 21THP. This is the ideal system for High-Frequency Circuitry, Teflon and exotic board materials, Flexible Films, and Metal core PCB material.

Working area : 350mm x 250mm

FP-21T Specs :

Minimum pattern width (mm) <0.1 (<4 mil)
Minimum milling width (mm) 0.1 (4 mil)
Working area (mm) 350 x 250 x 30 (14" x 10" x 1.18")
Table size (mm) 460 x 450 (18" x 18")
Control axis X, Y, Z
Control motor 5 phase stepper motor
Resolution (µm) *4 4 (0.16 mil)
Maximum travel speed (mm/sec.) *1 80 (3.2")
Spindle speed (min-1)

Spindle motor 		5,000 - 40,000 (model 40/U)
5,000 - 60,000 (model 60)
5,000 - 100,000 (model 100)
DC Spindle (model 40/U)
HF Spindle (model 60/100)
Drilling (mm) 0.2 - 3.175 (8 - 125 mil)
Maximum drilling cycle (cycles/min) *2 80
Maximum drilling stroke 30mm (1.18")
Tool change Collet chuck
Milling
method 		Absolute Manual switching
Incremental Yes
Compressed air (Mpa) 0.5 (required for HP type)
Power consumption 110 / 240V, 50-60Hz, 250VA
Machine dimensions
W x D x H (mm)		 620 x 505 x 420
(24" x 20" x 17")
Machine weight (kg) Approx. 42 (93 lbs)
Interface One USB or RS-232C port
(Additional USB required with optional fiducial camera)
Standard equipment

Software: DesignPro (Conversion + CAM)

Connecting Cable (RS232C/USB)
Backup Material

Extention hose for Vacuum cleaner
Options and accessories Fiducial positioning camera 30x
Vacuum table (VT-ABS)
Dust proof, Acoustic cabinet
Tool depth measurement 
Vacuum cleaner
Starter kit
(Option)

15x Loupe

Copper clad

Backup material

Clean and Lube accessories

Tools: End mills  (12 pieces)
Drill bit  (28 pieces)
Router bit (10 pieces)

*1 Optimum speed for cutting depends on tool, material of board and so on.
*2 This is a repeat count of drill's up and down on the maximum stroke.
Optimum strokes depends on the diameter of tool.
*3 In case of 80 strokes, maximum drilling stroke shortens. (to be adjusted at the factory)
*4 The smallest traveling figures for ordering each 3 axis movement.
They do not represent the accuracy of axis positioning.


Contact Us Now...

Phone : 415-258-9999
Send us an eMail