- Equipped with Auto-Tool-Change and provides superior cost performance
- This model employs Auto-Tool-Change mechanism at a very low price
- Up to 10 tools are available for automatic tool change.
- The 40krpm variable speed spindle motor is made in Japan with high quality and less runout.
Tool change function operates without the use of an air compressor.
Cabinet is available as an optional item
Well designed and easy to perform maintenance
Standard camera monitoring system
Magnify the surface of the board and display on a monitor. You can easily adjust the right position while viewing display. (Maximum useful magnification depends on the size of the screen)
AutoLab Specs :
|Minimum pattern width (mm)||0.1 (4 mil)|
|Minimum milling width (mm)||0.1 (4 mil)|
|Working area (X/Y/Z) (mm)||230 x 310 x 57 (9.0" x 12.2" x 2.24")|
|Table size (mm)||296 x 370 (11.6" x 14.5")|
|Control axis||X, Y, Z|
|Control motor||Stepper Motor|
|Resolution (µm) *3||0.156 (0.00614 mil)|
|Maximum Travel Speed (mm/sec.) *1||55 (2.17")|
|Spindle speed (min-1)
|5,000 - 62,000
DC Brushless Spindle
|Drilling (mm)||0.2 - 3.175 (8 - 125 mil)|
|Maximum drilling cycle (cycles/min.) *2||80|
|Maximum thickness of processed material (mm) *4||10 (0.4")|
|Tool change||Automatic / 13|
|Compressed air (Mpa)||---|
|Power consumption||100 - 240 V, 50-60 Hz, 200VA|
W x D x H (mm)
|435 x 575 x 430 (17.2" x 23" x 17")
With cabinet: 462 x 575 x 467 (18.2" x 23" x 19")
|Machine weight (kg)||Approx. 34 (76 lbs)
With cabinet: Approx. 44 (99 lbs)
|Interface||One USB or one RS-232C port|
|Standard equipement||Fiducial positioning camera (USB)*5
13 Pieces Auto Tool Change
Software: EASY CAD, Conversion & CAM
|Options and accessories||Cabinet
Ring-setter/ Precision ring-setter (manual)
Software: Correct DXF
|Connecting Cable (RS232C / USB)
Magnifying glass 10x
Extention hose for Vacuum cleaner
*1 Optimum speed for cutting depends on tool, material of board and so on.
*2 This is a repeat count of drill's up and down on the maximum stroke.
Optimum strokes depends on the diameter of tool.
*3 The smallest traveling figures for ordering each 3 axes movement.
They do not represent the accuracy of axis positioning.
*4 Value of the thickness of the material on the work table.
This value does not show the maximum drilling stroke.
*5 Maximum useful magnification depends on the size of the screen.